What do you do if you have to solder thousands of through-hole parts? The expensive, professional way of doing this is running the boards through a wave soldering machine, or a machine with a fancy ...

Ever wanted to own your very own 4-foot humanoid robot? If so — and if you have access to a 3D printer, a whole lot of free time, and a couple thousand dollars to cover materials — then robotics ...

Most robot arms are designed to carry and manipulate payloads, but HUENIT modular robot arm is much more versatile as besides a traditional suction module, the robot supports modules such as a 3D ...

This project is a 3D printed 4 Degree of Freedom (4 DoF) robot arm, inspired by the SCARA robot design from howtomechatronics.com. The robot arm is powered by Arduino and Raspberry Pi, with the ...

ARCTOS is a 6-DOF robot arm based upon 3D printed mechanics running a modified version of GRBL firmware. Let’s get this straight now, the firmware is open source, but the hardware plans are a paid ...

A continuous line of plastic makes up this intricate robot-built chair, designed using a new 3D-printing software by a team from the Bartlett School of Architecture in London. The Bartlett's Design ...

Never short of an innovative idea or two, researchers at the Massachusetts Institute of Technology developed a new robotic system capable of 3D printing an entire building. The system involves a ...

Hot on the heels of InMoov, the 3D-printable android, comes a similar but much less intimidating project for DIYers by Hello Robo. MAKI is a cute communication robot that can be assembled from ...

This a robot can walk, without electronics, and only with the addition of a cartridge of compressed gas, right off the 3D-printer. It can also be printed in one go, from one material. Imagine a robot ...