Welcome to our blog post on interfacing the WS2811 (5V) RGB LED strip with Arduino! In this guide, we will walk you through the process of connecting and controlling WS2811 LED strips using an Arduino ...

In this project we are going to interface 5 RGB (Red Green Blue) LEDs to Arduino Uno. These LEDs are connected in parallel for reducing PIN usage of Uno. A typical RGB LED is shown in below figure: ...

C# Application to control RGB Leds, or LED Strips with arduino. READ the wiki! Hello world! Today i made a c# Application with visual studio to control RGB Leds/Led strips. The Arduino code is very ...

Here is an artistic Arduino project for the fun-minded. The circuit is an Arduino RGB LED controller running on a sweet ‘n’ simple code,but with a little hardware surprise outside the Arduino board.

Remote control for both RGB led strip and string light bulbs using MySensors to drive it remotely over MQTT and radio. The node runs on Arduino Nano connected with NRF24L01+ radio. There is also four ...

This system uses a colour-changing LED (RGB LED/tri-colour LED) that switches to a new colour every 5 seconds. Simultaneously, the colour name is displayed on an OLED mini screen (SSD1306). This ...

A few months ago I reviewed ANAVI Light pHat for Raspberry Pi which allows you to control an LED RGB strip from the popular development board. However, if all you need is to switch the RGB LED light ...

This project turns on and turns off a laser LED after every second. It can also monitor its own supply voltage level. The circuit can be extended for use as an audio-visual alarm system for security ...