Programming speed By default the SPI communication is F_CPU/128, this sketch has been tested with a lower prescaler and it programmed much faster, but sometimes it failed at higher speeds, so the best ...

This shield / carrier board, once assembled, turns your Arduino Nano, Arduino Pro Mini, or Arduino Pro Micro into an AVR ISP programmer. The ISCP socket is wired to work directly with the ArduinoISP ...

The ISP programmer is connected to the 6-pin ISP connector of the Arduino Nano to be reprogrammed (hereinafter referred to as "target"). A double-row pin header with a 2x3-pin version may have to be ...

Connect the programmer with your Arduino compatible board and start uploading the Arduino boot loader or upload your sketch. No drivers are needed, just select ‘Arduino as ISP’ from the IDE ...

We found this Arduino AVR ISP programmer particularly interesting. AVR microcontrollers can utilize an interface called In-System-Programming. ISP allows the chip to be programmed or reprogrammed ...

“The Arduino ISP is an In-System-Programmer that is used to program AVR microcontrollers. You can use the Arduino ISP to upload sketches directly on the AVR-based Arduino boards without the need ...

[Minifloat] is using his TI Launchpad development board as an In-System Programmer for AVR chips (translated). There are a ton of homebrew AVR programmers out there, and using an Arduino for ISP ...