* * MIT License */ #include <Arduino.h> #if !defined (ARDUINO_ESP32C3_DEV) // This is due to a bug in RISC-V compiler, which requires unused function sections :- (. #define DISABLE_CODE_FOR_RECEIVER / ...

A few months ago, [Julian Ilett] found a problem using the Arduino library for PWM. Recently, he revisited the issue and used his own PWM code to fix the problem. You can watch the video below.

I wrote this when I could not find Arduino code online that could accurately and reliably read 25kHz pwm signals. For reliable PWM you must handle the following edge cases: 100% or 0% PWM signal with ...

So we can use a simple formula for routine calculations: “level = 255/5 x effective voltage” The experimental code for ATtiny85 is the same as the Arduino Sketch, as indicated. The only deviation is ...

The Atmega 328P chip in the Arduino Uno has three PWM timers (known as Timer 0, Timer 1, and Timer 2) controlling six PWM outputs. Each of the timers has a prescaler that generates the timer clock by ...

This project uses the Arduino Uno PWM output to realize a fully isolated analog output with a range of 0..5 V or more. The use of an averaged PWM signal is not comparable with a real DAC, but it has ...

The Arduino software environment, including the IDE, libraries, and general approach, are geared toward education. It’s meant as a way to introduce embedded development to newbies. This is a … ...

This test with this microcontroller was conclusive. And I returned on Arduino nano with my ESP32 experience to program it with multitasking. After several tests and corrections., I ended up running 3 ...

Arduino Uno, or systems based on the ATmega328 chip has no a true analog output. The easiest way is to use one of the PWM outputs and filter the signal with a passive RC filter to obtain an analog ...