A display decoder is used to convert a BCD or a binary code into a 7 segment code used to operate a 7 segment LED display. Here we design a simple display decoder circuit using logic gates. A display ...
Over on the [Behind The Code with Gerry] YouTube channel our hacker [Gerry] shows us how to emulate a 74LS48 BCD-to-7-segment decoder/driver using an Altera CPLD Logic Chip From 1998. This is very ...
This project is a Verilog module designed to display hexadecimal numbers on two 7-segment displays, including logic to handle values greater than 9. Input: SW (4-bit): The input value to be displayed, ...
Over on the [Behind The Code with Gerry] YouTube channel our hacker [Gerry] shows us how to emulate a 74LS48 BCD-to-7-segment decoder/driver using an Altera CPLD Logic Chip From 1998. This is very ...
This repository contains VHDL code for a 7-segment display decoder and a two-digit up counter implemented on an FPGA. The decoder takes a 4-bit binary input from switches (sw) and outputs the ...
The HEF4543B is a BCD to 7-segment latch/decoder/driver for liquid crystal and LED displays. It has four address inputs (D0 to D3), an active LOW latch enable input (LE), an active HIGH blanking input ...
Many options exist to drive seven-segment LED displays, but most are limited to low output currents. The approach described here uses one 74ALS374 or 74AS374 octal latch, wired as a shift register, ...
Some results have been hidden because they may be inaccessible to you
Show inaccessible results
Feedback